![]() ![]() If you ruin it or it is ruined by the water, you may end up with a brick.Īlso make sure you are very gentle. Pay special attention to the home button and home button cable. Don't let alcohol touch the screen as it will ruin it. You also must look at all the connectors that connector to the board, such as the tip of the screen assembly cables, the battery cable, the lightning cable, the volume and power control cable, and if they have black marks, clean them as well. ![]() While the board is soaking, you have to clean and dry the lightning connector assembly. It would be even better if you could remove the shields, but that requires soldering tools and an experienced tech. To tackle liquid damage, you must be prepared for a long and tedious process.įirst, you need to displace the water completely by removing the logic board using this guide, soak it in 90%+ isopropyl alcohol, then clean it with a soft brush. If you examine the logic board around the area you described with a magnifying glass, you should be able to see where the damage is. You obviously have some shorted components.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |